It’s a very simple idea, but one that SwitchBot has executed well.
However, theyre pretty expensive which is where the SwitchBot Blind Tilt comes in.
It offers the ideal solution for renters or homeowners on a budget.
The SwitchBot Blind Tilt comes with all the fittings you need, but you’ll need to buy a Wi-Fi hub (shown on the left) separately
Its a very simple idea, but one that SwitchBot has executed well.
You’ll find all today’s best prices below.
Even without discounts applied, the Blind Tilt costs far less than a full motorized smart blind.
Once thats done, just clamp the main motor unit onto the wand, and youre ready to start.
This attaches to your windowpane using 3M tape, and plugs into the Blind Tilt using a short cable.
Note that this isn’t included in the box; it’s a separate purchase.
Linking the Blind Tilt to the SwitchBot Hub Mini via the SwitchBot app is straightforward.
The SwitchBot app is attractive and simple to use, with your devices organized into rooms.
Adding the Blind Tilt to Google Home was straightforward, too.
you could even link it to a smart bulb so the blinds lower when the light is turned on.
Should you buy the SwitchBot Blind Tilt?
5/5
Design
Easy to fit, although not very attractive.
The SwitchBot Blind Tilt comes with all the fittings you need, but you’ll need to buy a Wi-Fi hub (shown on the left) separately
Practical rather than beautiful.
You’re on a budget
The SwitchBot Blind Tilt is much cheaper than investing in a whole motorized blind.
You’re picky about aesthetics
This isn’t the most attractive gear in the world.
Use the measuring tool included with the SwitchBot Blind Tilt to choose the correct sized adapter(Image credit: Future)
If you want something clean and neat-looking, you’ll need a purpose-made smart blind.
Here are two other options to consider.
It’s more expensive than the Blind Tilt, but cheaper than a whole motorized curtain rail.
The Blind Tilt also comes with a cardboard template that helps you position everything correctly in relation to your blind wand(Image credit: Future)
The motor unit slides into a connector that adheres to the blind rail(Image credit: Future)
Once you’ve fitted the small, medium, or large adapter to the blind wand, this gray piece with cogs clips over the top(Image credit: Future)
The main motor unit clips onto the cog piece, allowing it to rotate the wand(Image credit: Future)
The Blind Tilt is quite large when fully assembled
Connecting the SwitchBot Blind Tilt to the SwitchBot app is super simple. Just press the button on the motor unit and the app will locate it within a few seconds
You can adjust the angle of your blinds using a slider in the SwitchBot app, open or close them fully with a tap of a button, and set schedules
The Blind Tilt is operated the same way as a smart light bulb in Google Home, although it’s a little slower to respond
