I still have two old Kobras in operation, showing that they certainly have longevity.
So, for complete beginners, this machine is absolutely ideal.
However, for most people, this won’t be an issue.
Once you register the machine, you’re free to access these.
Whilst multi-filament is an up-and-coming technology, the Ace Pro really seems to refine it.
So, at the end of the test, I was really impressed with the Anycubic Kobra S1.
There’s a reason it made my round-up of thebest 3D printers, after all.
It actually excelled in many areas and was nice and easy to use.
This means it will fit neatly on most work surfaces without taking up too much room.
Whilst this increases the footprint, it’s still relatively neat and compact.
As with all of these machines, the setup is relatively straightforward.
The unpacking process, as stated in the intro, is about 10 minutes.
This enables you to print with a wide variety of materials.
One of the other features that is really worth pointing out is the hot end.
Likewise, there are plenty of nozzle options, with 0.4 mm obviously being the standard.
The large touchscreen LCD is integrated into the machine and navigates the prefs, calibration, and model loading.
Models can be wirelessly transferred to the machine or selected from a USB stick inserted into the side.
This ensures that the filament is in absolutely optimum condition before it’s fed to the printer.
I have to say, this makes a huge difference to the print quality.
At present, for that small upgrade amount, it is well worth going for the Combo version.
It’s also able to reach temperatures of 320oC, which will cover most materials.
Finally, the features list should mention the ultra-quiet printing, which Anycubic states is just 44 dB.
In use, it is noticeably quieter than some of the other CoreXY machines.
As the model completed, sure enough, it looked good and showed decent overall print quality.
you might then assign the material types.
From here, you’re free to use the tools to colour the model.
The easiest to use is the fill tool, as this block fills areas.
The speed witnessed when printing single filament drops away, and the overall print times rapidly increase.
What was a 43-minute print becomes a 14-hour print.
You also notice that the quality of the multi-filament prints stays exceptionally good, with clean walls and structure.
The swap in filaments during the print process doesn’t adversely affect the overall print quality.
What really appeals here is the absolute print quality.
Should You Buy the Anycubic S1?
Don’t buy it if…
You need fast multi-filament printing.
you’re gonna wanna print with more than eight colours.
If you need more, you’ll need to look at another printer.
Still looking for the right unit for you?
I’ve also reviewed thebest 3D printers for miniaturesand thebest hobby 3D printersaround.
